D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
89
5-37 delete accounting method_list_name
Description
This command is used to delete a user-defined method list of accounting methods.
Format
delete accounting method_list_name <string 15>
Parameters
<string 15> - Specify the built-in or user-defined method list.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete the user-defined accounting method list called “shell_acct” from switch:
DGS-3120-24TC:admin#delete accounting method_list_name shell_acct
Command: delete accounting method_list_name shell_acct
Success.
DGS-3120-24TC:admin#
5-38 show accounting
Description
This command is used to display the list of accounting methods on the Switch.
Format
show accounting [default | method_list_name <string 15> | all]
Parameters
default - Display the user-defined list of default accounting methods.
method_list_name - Specify the user-defined list of specific accounting methods.
<string 15> - Enter the name of the method list.
all - Display all accounting method lists on the Switch.
Restrictions
Only Administrator-level users can issue this command.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)