xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
331
Parameters
<pool_name 12> - Specify the DHCP pool name to clear.
<ipaddr> - Specify the IP address to clear.
all - Specify to clear all IP addresses.
all - Specify to clear all DHCP pool names and IP addresses.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear dynamic binding entries in the pool named “engineering”:
DGS-3120-24TC:admin#clear dhcp binding dhcppool01 10.20.3.4
Command: clear dhcp binding dhcppool01 10.20.3.4
Success.
26-20 show dhcp binding
Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {
<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for “engineering”:
DGS-3120-24TC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Address Hardware Address Type Status Lifetime
------------ --------------- ----------------- -------- --------- -------------
engineering 192.168.0.1 00-80-C8-08-13-88 Ethernet Manual 86400
engineering 192.168.0.2 00-80-C8-08-13-99 Ethernet Automatic 38600
engineering 192.168.0.3 00-80-C8-08-13-A0 Ethernet Offering -
engineering 192.168.0.4 00-80-C8-08-13-B0 Ethernet BOOTP Infinite
To Next Page
Loading...
Need help?
General
