D-Link xStack DGS-3120 Series - Enable Mirror; Disable Mirror

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
618
DGS-3120-24TC:admin#config mirror port 1:3 add source ports 1:7-1:12 both
Command: config mirror port 1:3 add source ports 1:7-1:12 both
Success.
DGS-3120-24TC:admin#
60-2 enable mirror
Description
This command is used to enable mirror function without having to modify the mirror session
configuration.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable mirroring function:
DGS-3120-24TC:admin# enable mirror
Command: enable mirror
Success.
DGS-3120-24TC:admin#
60-3 disable mirror
Description
This command is used to disable mirror function without having to modify the mirror session
configuration.
Format
disable mirror
Parameters
None.