D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
920
Example
To show SSL cache timeout:
DGS-3120-24TC:admin#show ssl cachetimeout
Command: show ssl cachetimeout
Cache timeout is 600 second(s)
DGS-3120-24TC:admin#
95-7 config ssl cachetimeout
Description
This command is used to configure cahce timeout value which is designed for dlktimer library to
remove the session id after expired. In order to support the resume session feature, the SSL
library keep the session id in web server, and invoking the dlktimer library to remove this session id
by cache timeout value. The unit of argument’s value is second and it’s boundary is between 60 (1
minute) and 86400 (24 hours). Default value is 600 seconds.
Format
config ssl cachetimeout <value 60-86400>
Parameters
timeout - Specify the SSL cache timeout value attributes.
<value 60-86400> - Enter the timeout value here. This value must be between 60 and 86400.
Restrictions
None.
Example
To configure the SSL cache timeout value to 60:
DGS-3120-24TC:admin#config ssl cachetimeout 60
Command: config ssl cachetimeout 60
Success.
DGS-3120-24TC:admin#
95-8 config ssl certificate chain
Description
This command is used to specify chain of certifications on the Switch.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)