D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
64
DGS-3120-24TC:admin#enable authen_policy_encryption
Command: enable authen_policy_encryption
Success.
DGS-3120-24TC:admin#
5-2 disable authen_policy_encryption
Description
This command is used to disable the authentication policy encryption. When disabled, TACACS+
and RADIUS key will be in the plain text form.
Format
disable authen_policy_encryption
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the authentication policy encryption:
DGS-3120-24TC:admin#disable authen_policy_encryption
Command: disable authen_policy_encryption
Success.
DGS-3120-24TC:admin#
5-3 enable password encryption
Description
This command is used to enable password encryption. The user account configuration information
will be stored in the configuration file, and can be applied to the system later.
If the password encryption is enabled, the password will be in encrypted form.
Format
enable password encryption