D-Link xStack DGS-3120 Series - Config Authentication Server Failover; Show Authentication

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
190
Restrictions
None.
Example
This example displays authorization status:
DGS-3120-24TC:admin#show authorization
Command: show authorization
Authorization for Attributes: Enabled
DGS-3120-24TC:admin#
16-11 config authentication server failover
Description
This command is used to configure authentication server failover function.
Format
config authentication server failover [local | permit | block]
Parameters
local - Use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - Block the client (Default setting).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Set authentication server auth fail over state:
DGS-3120-24TC:admin# config authentication server failover local
Command: config authentication server failover local
Success.
DGS-3120-24TC:admin#
16-12 show authentication
Description
This command is used to display authentication global configuration.