D-Link xStack DGS-3120 Series - Show Radius

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
56
DGS-3120-24TC:admin# config radius 1 auth_port 60
Command: config radius 1 auth_port 60
Success.
DGS-3120-24TC:admin#
4-25 show radius
Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
DGS-3120-24TC:admin# show radius
Command: show radius
Index 1
IP Address : 172.18.211.71
Auth-Port : 1812
Acct-Port : 1813
Timeout : 5 sec
Retransmit : 2
Key : 1234567
Index 2
IP Address : 172.18.211.108
Auth-Port : 1812
Acct-Port : 1813
Timeout : 5 sec
Retransmit : 2
Key : adfdslkfjefiefdkgjdassdwtgjk6y1w
Total Entries : 2
DGS-3120-24TC:admin#