D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
541
Chapter 50 Jumbo Frame Command
List
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
50-1 enable jumbo_frame
Description
This command is used to configure the jumbo frame setting as enable.
Format
enable jumbo_frame
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the Jumbo frame:
DGS-3120-24TC:admin# enable jumbo_frame
Command: enable jumbo_frame
The maximum size of jumbo frame is 13312 bytes.
Success.
DGS-3120-24TC:admin#
50-2 disable jumbo_frame
Description
This command is used to configure the jumbo frame setting as disable.
Format
disable jumbo_frame

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)