D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
688
Format
delete nlb multicast_fdb [<vlan_name 32> |vlanid <vlanid 1-4094>] <macaddr>
Parameters
<vlan_name 32> - Specify the VLAN of the NLB multicast FDB entry to be deleted.
vlanid - Specify the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here.
<macaddr> - Specify the MAC address of the NLB multicast FDB entry to be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete NLB multicast FDB entry:
DGS-3120-24TC:admin# delete nlb multicast_fdb default 03-bf-01-01-01-01
Command: delete nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-3120-24TC:admin#
67-7 show nlb fdb
Description
This command is used to show the NLB Configured entry.
Format
show nlb fdb
Parameters
None.
Restrictions
None.
Example
To display the NLB forwarding table:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)