D-Link xStack DGS-3120 Series - Delete Snmp User; Show Snmp User

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
966
DGS-3120-24TC:admin# create snmp user user123 group123 encrypted by_password
auth md5 12345678 priv des 12345678
Command: create snmp user user123 group123 encrypted by_password auth md5
12345678 priv des 12345678
Success.
DGS-3120-24TC:admin#
101-6 delete snmp user
Description
This command is used to remove a user from an SNMP group and delete the associated group in
SNMP group.
Format
delete snmp user <username 32>
Parameters
<username 32> - The name of the user on the host that connects to the agent. The range is 1 to
32.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a SNMP user “user123”:
DGS-3120-24TC:admin# delete snmp user user123
Command: delete snmp user user123
Success.
DGS-3120-24TC:admin#
101-7 show snmp user
Description
This command is used to display information on each SNMP username in the group username
table.
Format
show snmp user