xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1101
120-13 config wac authentication_page element
Description
This command is used to customize the authenticate page elements.
Format
config wac authentication_page element [default | page_title <desc 128> |
login_window_title <desc 64> | user_name_title <desc 32> | password_title <desc 32> |
logout_window_title <desc 64> | notification_line <value 1-5> <desc 128>]
Parameters
default - Reset the page elements to default.
page_title - Specify to configure the title of the authentication page.
<desc 128> -Enter a description with maximum of 128 characters.
login_window_title - Specify to configure the login window title of the authentication page.
<desc 64> - Enter a description with maximum of 64 characters.
user_name_title - Specify configure the user name title of the authentication page.
<desc 32> - Enter a description with maximum of 32 characters.
password_title - Specify to configure the password title of the authentication page.
<desc 32> - Enter a description with maximum of 64 characters.
logout_window_title - Specify to configure the logout window title of the authentication page.
<desc 64> - Enter a description with maximum of 64 characters.
notification_line - Specify to set the notification information by line in authentication Web pages.
<value 1-5> - Enter a value between 1 and 5.
<desc 128> - Enter a description with maximum of 128 characters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the authenticate page elements:
DGS-3120-24TC:admin#config wac authentication_page element notification_line 1 C
opyright @ 2011 D-Link All Rights Reserved
Command: config wac authentication_page element notification_line 1 Copyright @
2011 D-Link All Rights Reserved
Success.
120-14 show wac
Description
This command is used to display the WAC global setting.
To Next Page
Loading...
Need help?
General
