D-Link xStack DGS-3120 Series - Enable Ssh; Disable Ssh

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
908
Example
To configure SSH server maximum session number is 3:
DGS-3120-24TC:admin# config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DGS-3120-24TC:admin#
94-8 enable ssh
Description
This command is used to enable SSH server services.
Format
enable ssh
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable SSH server:
DGS-3120-24TC:admin# enable ssh
Command: enable ssh
Success.
DGS-3120-24TC:admin#
94-9 disable ssh
Description
This command is used to disable SSH server services.
Format
disable ssh