D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
971
<oid> - Object-Identified tree, MIB tree.
view_type - Specify the access type of the MIB tree in this view.
included - Includes for this view.
excluded - Excluded for this view.
Restrictions
Only Administrator-level users can issue this command.
Example
To create SNMP view “view123”:
DGS-3120-24TC:admin# create snmp view view123 1.3.6 view_type included
Command: create snmp view view123 1.3.6 view_type included
Success.
DGS-3120-24TC:admin#
101-12 delete snmp view
Description
This command is used to remove a view record.
Format
delete snmp view <view_name 32> [all | <oid>]
Parameters
view - View name to be deleted.
<view_name 32> - Enter the view name here. The name can be up to 32 characters long.
all - Specify that all view records will be removed.
<oid> - Object-Identified tree, MIB tree.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete SNMP view “view123”:
DGS-3120-24TC:admin# delete snmp view view123 all
Command: delete snmp view view123 all
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)