D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
968
long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create SNMP group “group123”:
DGS-3120-24TC:admin# create snmp group group123 v3 auth_priv read_view
CommunityView write_view CommunityView notify_view CommunityView
Command: create snmp group group123 v3 auth_priv read_view CommunityView
write_view CommunityView notify_view CommunityView
Success.
DGS-3120-24TC:admin#
101-9 delete snmp group
Description
This command is used to remove a SNMP group.
Format
delete snmp group <groupname 32>
Parameters
<groupname 32> - The name of the group will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete SNMP group “group123”:
DGS-3120-24TC:admin# delete snmp group group123
Command: delete snmp group group123
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)