D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1102
Format
show wac
Parameters
None.
Restrictions
None.
Example
Show global configuration about WAC:
DGS-3120-24TC:admin#show wac
Command: show wac
Web-based Access Control
--------------------------------
State : Disabled
Method : Local
Redirect Path :
Virtual IP : 0.0.0.0
Virtual IPv6 : ::
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Disabled
DGS-3120-24TC:admin#
120-15 show wac ports
Description
This command is used to display the port level setting.
Format
show wac ports {<portlist>}
Parameters
ports - Specify a range of member ports to show the status.
<portlist> - (Optional) Enter a list of ports to display here.
Restrictions
None.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)