D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1017
DGS-3120-24TC:admin#show log index 1-3
Command: show log index 1-3
Index Date Time Level Log Text
----- ---------- -------- ------- ----------------------------------------------
3 2011-05-10 04:06:40 CRIT(2) Unit 1, Right Side Fan 2 failed
2 2011-05-10 04:06:40 CRIT(2) Unit 1, Right Side Fan 1 failed
1 2011-05-09 11:10:23 INFO(6) Unit 1, Configuration and log saved to flash b
y console (Username: Anonymous)
DGS-3120-24TC:admin#
106-3 show log_software_module
Description
This command is used to display the protocols or applications that support the enhanced log. The
enhanced log adds the module name and module ID. Network administrators can display logs by
module name or module ID.
Format
show log_software_module
Parameters
None.
Restrictions
None.
Example
To display the protocols or applications that support the enhanced log:
DGS-3120-24TC:admin#show log_software_module
Command: show log_software_module
CFM_EXT DHCPv6_CLIENT DHCPv6_RELAY ERPS
ERROR_LOG MSTP OSPFV2 VRRP
DGS-3120-24TC:admin#
106-4 enable syslog
Description
This command is used to enable the sending of syslog messages.