D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
582
Format
enable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the LBD function globally:
DGS-3120-24TC:admin# enable loopdetect
Command: enable loopdetect
Success.
DGS-3120-24TC:admin#
54-4 disable loopdetect
Description
This command is used to disable the LBD function globally on the Switch.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the LBD function globally: