D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1068
characters long.
If no parameter is specified, all the VRRP entries will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete VRRP:
DGS-3120-24TC:admin#delete vrrp vrid 1 ipif System
Command: delete vrrp vrid 1 ipif System
Success.
DGS-3120-24TC:admin#
116-7 show vrrp
Description
This command is used to display the VRRP settings.
Format
show vrrp {ipif <ipif_name 12> {vrid <vrid 1-255>}}
Parameters
ipif - (Optional) Specify the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to
12 characters long.
vrid - (Optional) Specify the Virtual Router ID to be displayed.
<vrid 1-255> - Enter the Virtual Router ID to be displayed here. This value must be between 1
and 255.
If no parameter is specified, then all the VRRP entries will be displayed.
Restrictions
None.
Example
To display the VRRP configuration:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)