D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1069
DGS-3120-24TC:admin#show vrrp
Command: show vrrp
Global VRRP : Enabled
Non-owner Response Ping: Disabled
Interface Name : System
Authentication Type : Simple Text Password
Authentication Data : 12345678
VRID : 1
Virtual IP Address : 10.90.90.91
Virtual MAC Address : 00-00-5E-00-01-01
Virtual Router State : Master
State : Enabled
Priority : 100
Master IP Address : 10.90.90.90
Critical IP Address : 0.0.0.0
Checking Critical IP : Disabled
Advertisement Interval : 1 Sec(s)
Preempt Mode : True
Virtual Router Up Time : 621430 centi-secs
Total Entries: 1
DGS-3120-24TC:admin#
116-8 config vrrp trap state
Description
This command is used to enable or disable the VRRP trap state.
Format
config vrrp trap state [enable | disable]
Parameters
enable – Specify to enable the VRRP trap state.
disable – Specify to disable the VRRP trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to enable the VRRP trap state.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)