D-Link xStack DGS-3120 Series - Chapter 56 MAC Notification Command List

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
589
Chapter 56 MAC Notification Command
List
enable mac_notification
disable mac_notification
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}
config mac_notification ports [<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports {<portlist>}
56-1 enable mac_notification
Description
This command is used to enable global MAC address table notification on the Switch.
Format
enable mac_notification
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable mac_notification function:
DGS-3120-24TC:admin# enable mac_notification
Command: enable mac_notification
Success.
DGS-3120-24TC:admin#
56-2 disable mac_notification
Description
This command is used to disable global MAC address table notification on the Switch.
Format
disable mac_notification