D-Link xStack DGS-3120 Series - Disable Rspan; Create Rspan Vlan

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
856
Example
Configure RSPAN state to enable:
DGS-3120-24TC:admin# enable rspan
Command: enable rspan
Success.
DGS-3120-24TC:admin#
86-2 disable rspan
Description
This command is used to disable the RSPAN function.
Format
disable rspan
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Configure RSPAN state to disabled:
DGS-3120-24TC:admin# disable rspan
Command: disable rspan
Success.
DGS-3120-24TC:admin#
86-3 create rspan vlan
Description
This command is used to create the RSPAN VLAN. Up to 16 RSPAN VLANs can be created.
Format
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]