D-Link xStack DGS-3120 Series - Chapter 100 Simple Mail Transfer Protocol (SMTP) Command List

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
956
Chapter 100 Simple Mail Transfer
Protocol (SMTP) Command
List
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <port_number 1-65535> | self_mail_addr <mail_addr
254> | [add mail_receiver <mail_addr 254> | delete mail_receiver <index 1-8>]}(1)
show smtp
smtp send_testmsg
100-1 enable smtp
Description
This command is used to enable the SMTP status.
Format
enable smtp
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable SMTP status:
DGS-3120-24TC:admin#enable smtp
Command: enable smtp
Success.
DGS-3120-24TC:admin#
100-2 disable smtp
Description
This command is used to disable SMTP status.