D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1022
DGS-3120-24TC:admin#config syslog host all severity debug facility local0
Command: config syslog host all severity debug facility local0
Success.
DGS-3120-24TC:admin#
106-9 delete syslog host
Description
This command is used to delete the syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
host - The host index or all hosts.
<index> - Enter the host index value here.
all - Specify that all the host indexes will be used.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the specific syslog host:
DGS-3120-24TC:admin# delete syslog host 4
Command: delete syslog host 4
Success.
DGS-3120-24TC:admin#
106-10 show syslog host
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
host - The host index or all hosts.
<index> - (Optional) Enter the host index value here.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)