D-Link xStack DGS-3120 Series - Show Ssh Algorithm

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
903
enable - Enabled the algorithm.
disable - Disables the algorithm.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable SSH server public key algorithm:
DGS-3120-24TC:admin#config ssh algorithm DSA enable
Command: config ssh algorithm DSA enable
Success.
DGS-3120-24TC:admin#
94-2 show ssh algorithm
Description
This command is used to show the SSH service algorithm.
Format
show ssh algorithm
Parameters
None.
Restrictions
None.
Example
To show server algorithm: