D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
918
DGS-3120-24TC:admin# disable ssl
Command: disable ssl
Success.
DGS-3120-24TC:admin#
95-4 delete ssl certificate
Description
This command is used to delete a certification on the Switch.
Format
delete ssl certificate <path_filename 64>
Parameters
<path_filename 64> - Specify the certification file name on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a certificate:
DGS-3120-24TC:admin#delete ssl certificate web_ca2.cer
Command: delete ssl certificate web_ca2.cer
Success.
DGS-3120-24TC:admin#
95-5 show ssl
Description
This command is used to display the certificate status. User must download specified certificate
type according to desired key exchange algorithm. The options may be no certificate, RSA type or
DSA type certificate
Format
show ssl {certificate {[chain | <path_filename 64>]}}
Parameters
certificate - (Optional) Specify that the SSL certificate will be displayed.
chain - (Optioanl) Specify the chain of certifications on the Switch to be displayed.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)