D-Link xStack DGS-3120 Series - Show Ssh Authmode; Config Ssh User

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
905
Example
To configure user authentication method:
DGS-3120-24TC:admin# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DGS-3120-24TC:admin#
94-4 show ssh authmode
Description
This command is used to show the user authentication method.
Format
show ssh authmode
Parameters
None.
Restrictions
None.
Example
To show user authentication method:
DGS-3120-24TC:admin#show ssh authmode
Command: show ssh authmode
The SSH Authentication Method:
Password : Enabled
Public Key : Enabled
Host-based : Enabled
DGS-3120-24TC:admin#
94-5 config ssh user
Description
This command is used to update user information for SSH configuration.