D-Link xStack DGS-3120 Series - Show Mirror

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
619
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable mirroring function:
DGS-3120-24TC:admin# disable mirror
Command: disable mirror
Success.
DGS-3120-24TC:admin#
60-4 show mirror
Description
This command is used to display the current mirror function state and mirror session configuration
on the Switch.
Format
show mirror {group_id <value 1-4>}
Parameters
group_id - (Optional) Specify a mirror group ID.
<value 1-4> - Enter a mirro group identify value.
Restrictions
None.
Example
To display mirroring configuration: