D-Link xStack DGS-3120 Series - Page 926

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
921
Format
config ssl certificate chain [default | <cert_list>]
Parameters
default - Specify to use all certificates to constitute the SSL certificate chain.
<cert_list> - Specify chain of certifications on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure SSL chain of certifications
DGS-3120-24TC:admin#config ssl certificate chain web_ca2.cer,server.crt
Command: config ssl certificate chain web_ca2.cer,server.crt
Success.
DGS-3120-24TC:admin#