D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
332
Total Entries: 4
DGS-3120-24TC:admin#
26-21 show dhcp pool
Description
This command is used to display the information for DHCP pool. If pool name is not specified,
information for all pools will be displayed.
Format
show dhcp pool {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify the DHCP pool name.
Restrictions
None.
Example
To display the current DHCP pool information for “engineering”:
DGS-3120-24TC:admin#show dhcp pool engineering
Command: show dhcp pool engineering
Pool Name : engineering
Network Address : 10.10.10.0/24
Domain Name : dlink.com
DNA Server : 10.10.10.1
NetBIOS Name Server : 10.10.10.1
NetBIOS Node Type : broadcast
Default Router : 10.10.10.1
Pool Lease : 10 days, 0 hours, 0 minutes
Boot File : boot.bin
Next Server : 10.10.10.2
DGS-3120-24TC:admin#
26-22 show dhcp pool manual_binding
Description
This command is used to display the configured manual binding entries.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)