D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
72
Example
To configure a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# config authen_enable method_list_name enable_list_1 method
tacacs+ tacacs local_enable
Command: config authen_enable method_list_name enable_list_1 method tacacs+
tacacs local_enable
Success.
DGS-3120-24TC:admin#
5-14 delete authen_enable
Description
This command is used to delete a user-defined method list of authentication methods for
promoting user's privilege to Admin level.
Format
delete authen_enable method_list_name <string 15>
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# delete authen_enable method_list_name enable_list_1
Command: delete authen_enable method_list_name enable_list_1
Success.
DGS-3120-24TC:admin#
5-15 show authen_enable
Description
This command is used to display the method list of authentication methods for promoting user's
privilege to Admin level.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)