D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1028
107-2 show system_severity
Description
This command is used to display the severity level controls for the system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show severity level control for system:
DGS-3120-24TC:admin#show system_severity
Command: show system_severity
System Severity Trap : warning(4)
System Severity Log : information(6)
DGS-3120-24TC:admin#