D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1107
120-20 config wac trap state
Description
This command is used to enable or disable the WAC trap state.
Format
config wac trap state [enable | disable]
Parameters
enable – Specify to enable the WAC trap state.
disable – Specify to disable the WAC trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example show how to enable the WAC trap state.
DGS-3120-24TC:admin# config wac trap state enable
Command: config wac trap state enable
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)