D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
160
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable HTTP:
DGS-3120-24TC:admin# disable web
Command: disable web
Success.
DGS-3120-24TC:admin#
12-10 reboot
Description
This command is used to restart the Switch.
Format
reboot {force_agree}
Parameters
force_agree - (Optional) When force_agree is specified, the reboot command will be executed
immediatedly without further confirmation.
Restrictions
Only Administrator-level users can issue this command.
Example
To reboot the Switch:
DGS-3120-24TC:admin# reboot
Command: reboot
Are you sure to proceed with the system reboot?(y/n)
Please wait, the switch is rebooting…

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)