Name: D-Link xStack DGS-3120 Series
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

xStack

DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide

DGS-3120-24TC:admin#show ports details

Command: show ports details

Port : 1:1

--------------------

Port Status : Link Down

Description :

HardWare Type : Gigabits Ethernet

MAC Address : 00-01-02-03-04-10

Bandwidth : 1000000Kbit

Auto-Negotiation : Enabled

Duplex Mode : Full Duplex

Flow Control : Disabled

MDI : Auto

Address Learning : Enabled

Last Clear of Counter : 0 hours 10 mins ago

BPDU Hardware Filtering Mode: Disabled

Queuing Strategy : FIFO

TX Load : 0/100, 0 bits/sec, 0

packets/sec

RX Load : 0/100, 0 bits/sec, 0

packets/sec

CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh

Other manuals for D-Link xStack DGS-3120 Series

Questions and Answers:

Need help?

Do you have a question about the D-Link xStack DGS-3120 Series and is the answer not in the manual?

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)