D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
299
DGS-3120-24TC:admin# disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3120-24TC:admin#
25-8 show dhcp_relay
Description
This command is used to display the current DHCP relay configuration.
Format
show dhcp_relay {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified , the system will display all DHCP relay configuration.
Restrictions
None.
Example
To display DHCP relay configuration: