D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
302
25-11 config dhcp_relay option_60 default
Description
This command is used to configure the DHCP relay option 60 default drop option.
When there are no match servers found for the packet based on option 60, the relay servers will
be determined by the default relay server setting.
When there is no matching found for the packet, the relay servers will be determined based on the
default relay servers.
When drop is specified, the packet with no matching rules found will be dropped without further
process.
If the setting is no- drop, then the packet will be processed further based on option 61. The final
relay servers will be the union of option 60 default relay servers and the relay servers determined
by option 61.
Format
config dhcp_relay option_60 default [relay <ipaddr> | mode [drop | relay]]
Parameters
relay - Specify the IP address used for the DHCP relay forward function.
<ipaddr> - Enter the IP address used for this configuration here.
mode - Specify the DHCP relay option 60 mode.
drop - Specify to drop the packet that has no matching option 60 rules.
relay - The packet will be relayed based on the relay rules.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCP relay option 60 default drop option:
DGS-3120-24TC:admin#config dhcp_relay option_60 default mode drop
Command: config dhcp_relay option_60 default mode drop
Success.
DGS-3120-24TC:admin#
25-12 config dhcp_relay option_60 delete
Description
This command is used to delete DHCP relay option 60 entry.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)