D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
348
2200::5 1:5
Total Entries:1
DGS-3120-24TC:admin#
27-16 delete filter icmpv6_ra_all_node permit sip
Description
This command is used to delete a filter ICMPv6 RA all-nodes permit entry.
Format
delete filter icmpv6_ra_all_node permit sip <ipv6addr>
Parameters
<ipv6addr> - Enter the source IPv6 address of the entry which will be deleted in the filter ICMPv6
RA all-nodes forward list.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete permit entry from the filter ICMPv6 RA all-nodes forward list:
DGS-3120-24TC:admin#delete filter icmpv6_ra_all_node permit sip 2200::4
Command: delete filter icmpv6_ra_all_node permit sip 2200::4
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)