D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
371
DGS-3120-24TC:admin#show dvmrp nexthop
Command: show dvmrp nexthop
DVMRP Routing Next Hop Table
Source Address/NetMask Interface Name Type
---------------------- --------------- ------
10.0.0.0/8 ip2 Leaf
10.0.0.0/8 ip3 Leaf
20.0.0.0/8 System Leaf
20.0.0.0/8 ip3 Leaf
30.0.0.0/8 System Leaf
30.0.0.0/8 ip2 Leaf
Total Entries : 6
DGS-3120-24TC:admin#
30-7 show dvmrp routing_table
Description
This command is used to display the DVMRP routing table.
Format
show dvmrp routing_table {ipaddress <network_address>}
Parameters
ipaddress - (Optional) Specify the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP routing table.
Restrictions
None.
Example
To display DVMRP routing table: