D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
404
DGS-3120-24TC:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time = 300
VID VLAN Name MAC Address Port Type Status
---- -------------------------------- ----------------- ----- ------- -------
1 default 00-01-02-03-04-00 CPU Self Forward
1 default 00-23-7D-BC-08-44 1:1 Dynamic Forward
1 default 00-23-7D-BC-2E-18 1:1 Dynamic Forward
1 default 00-26-5A-AE-CA-1C 1:1 Dynamic Forward
1 default 60-33-4B-C4-52-1A 1:1 Dynamic Forward
Total Entries: 5
DGS-3120-24TC:admin#
To display the security FDB table:
DGS-3120-24TC:admin# show fdb security
Command: show fdb security
VID MAC Address Port Type Status Security Module
---- ---------------- ----- ------- -------- ---------------
1 00-00-00-10-00-01 1:1 Dynamic Drop 802.1X
1 00-00-00-10-00-02 1:2 Static Forward WAC
1 00-00-00-10-00-04 1:4 Static Forward Port Security
1 00-00-00-10-00-0A 1:5 Static Forward MAC-based Access Control
1 00-00-00-10-00-06 1:6 Dynamic Drop Compound Authentication
Total Entries: 5
DGS-3120-24TC:admin#
36-11 show multicast vlan_filtering_mode
Description
This command is used to show the multicast packet filtering mode for VLANs.
NOTE: A product supports the multicast VLAN filtering mode could not support the port filtering
mode at the same time.
Format
show multicast vlan_filtering_mode {[ vlanid < vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specify a list of VLANs to be configured.
<vidlist> - Enter the VLAN ID list here.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)