D-Link xStack DGS-3120 Series - Page 454

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
449
Example
To unset port range 9-10 from IGMP snooping static member ports for group 239.1.1.1 on default
VLAN:
DGS-3120-24TC:admin# config igmp_snooping static_group vlan default 239.1.1.1
delete 2:9-2:10
Command: create igmp_snooping static_group vlan default 239.1.1.1 delete 2:9-
2:10
Success.
DGS-3120-24TC:admin#
42-12 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specify the multicast group IP address.
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3120-24TC:admin# show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / default 239.1.1.1 2:9-2:10
Total Entries : 1
DGS-3120-24TC:admin#