D-Link xStack DGS-3120 Series - Page 526

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
521
URL. When redirect jwac_login_page is enabled, the unauthenticated host will be redirected to
the jwac_login_page on the Switch to finish authentication.
When enable redirect to quarantine server is in effect, a quarantine server must be configured first.
Format
enable jwac redirect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC redirect:
DGS-3120-24TC:admin#enable jwac redirect
Command: enable jwac redirect
Success.
DGS-3120-24TC:admin#
49-6 disable jwac redirect
Description
This command is used to disable JWAC redirect. When redirect is disabled, only access to
quarantine_server and the jwac_login_page from an unauthenticated host is allowed, all other
Web access will be denied.
Format
disable jwac redirect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable JWAC redirect: