D-Link xStack DGS-3120 Series - Page 530

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
525
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable JWAC UDP filtering:
DGS-3120-24TC:admin#disable jwac udp_filtering
Command: disable jwac udp_filtering
Success.
DGS-3120-24TC:admin#
49-12 enable jwac quarantine_server_monitor
Description
This command is used to enable the JWAC quarantine server monitor. When enabled, the JWAC
switch will monitor the quarantine server to ensure the server is okay. If the Switch detects no
quarantine server, it will redirect all unauthenticated HTTP accesses to the JWAC Login Page
forcibly if the redirect is enabled and the redirect destination is configured to be quarantine server.
Format
enable jwac quarantine_server_monitor
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC quarantine server monitoring:
DGS-3120-24TC:admin#enable jwac quarantine_server_monitor
Command: enable jwac quarantine_server_monitor
Success.
DGS-3120-24TC:admin#