D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
537
Example
To disable the configuration authorized from the local database:
DGS-3120-24TC:admin#config jwac authorization attributes local disable
Command: config jwac authorization attributes local disable
Success.
DGS-3120-24TC:admin#
49-28 show jwac update_server
Description
This command is used to display the JWAC update server.
Format
show jwac update_server
Parameters
None.
Restrictions
None.
Example
To display the JWAC update server:
DGS-3120-24TC:admin# show jwac update_server
Command: show jwac update_server
Index IP TCP/UDP Port State
----- ------------------ ------ ---- -------
1 172.18.0.0/21 TCP 1 Active
2 172.18.0.0/21 TCP 2 Active
3 172.18.0.0/21 TCP 3 Active
DGS-3120-24TC:admin#
49-29 config jwac authentication_page element
Description
This command is used by administrators to customize the JWAC authenticate page.