D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
539
Format
config jwac authenticate_page [japanese | english]
Parameters
japanese - Specify to change to the Japanese page.
english - Specify to change to the English page. This is the default page.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To customize the authenticate page:
DGS-3120-24TC:admin#config jwac authenticate_page japanese
Command: config jwac authenticate_page japanese
Success.
DGS-3120-24TC:admin#
49-31 show jwac authenticate_page
Description
This command is used to display the element mapping of the customized authenticate page.
Format
show jwac authenticate_page
Parameters
None.
Restrictions
None.
Example
To display the element mapping of the customized authenticate page:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)