D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
629
DGS-3120-24TC:admin#config mld_proxy upstream_if vlan default router_ports add
1:3
Command: config mld_proxy upstream_if vlan default router_ports add 1:3
Success.
DGS-3120-24TC:admin#
62-5 show mld_proxy
Description
This command is used to display the MLD proxy’s configuration or group information. The display
status item means group entry is determined by whether or not the chip has been inserted.
Format
show mld_proxy {group}
Parameters
group - (Optional) Specify the group information.
Restrictions
None.
Example
To display the MLD proxy’s information:
DGS-3120-24TC:admin#show mld_proxy
Command: show mld_proxy
MLD Proxy Global State : Enabled
Upstream Interface
VLAN ID : 1
Dynamic Router Ports : 1:1-1:4
Static Router Ports : 1:5
Unsolicited Report Interval : 10
Source IP Address : ::
Downstream Interface
VLAN List : 2-4
DGS-3120-24TC:admin#
To display the MLD proxy’s group information: