D-Link xStack DGS-3120 Series - Page 672

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
667
Restrictions
None.
Example
To show the limited multicast address range on ports 1 and 3:
DGS-3120-24TC:admin#show limited_multicast_addr ports 1:1,1:3
Command: show limited_multicast_addr ports 1:1,1:3
Port : 1:1
Access : Permit
Profile ID Name Multicast Addresses
---------- -------------------------------- -------------------------------
2 MOD 225.1.1.1-225.1.1.10
Port : 1:3
Access : Permit
Profile ID Name Multicast Addresses
---------- -------------------------------- -------------------------------
2 MOD 225.1.1.1-225.1.1.10
DGS-3120-24TC:admin#
To show the limited multicast settings configured on VLAN 1:
DGS-3120-24TC:admin#show limited_multicast_addr vlanid 1
Command: show limited_multicast_addr vlanid 1
VLAN ID : 1
Access : Permit
Profile ID Name Multicast Addresses
---------- -------------------------------- -------------------------------
2 MOD 225.1.1.1-225.1.1.10
DGS-3120-24TC:admin#
65-10 config cpu_filter l3_control_pkt
Description
This command is used to configure the port state for the Layer 3 control packet filter.