xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
679
delete - Used to de-associate a profile from a multicast VLAN.
profile_name - Specify the multicast VLAN profile name.
<profile_name 1-32> - Enter the multicast VLAN profile name here. The name can be up to
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add an IGMP snooping profile to a multicast VLAN group with the name “v1”:
DGS-3120-24TC:admin# config igmp_snooping multicast_vlan_group v1 add
profile_name channel_1
Command: config igmp_snooping multicast_vlan_group v1 add profile_name
channel_1
Success.
66-10 show [igmp_snooping | mld_snooping] multicast_vlan_group
Description
This command is used to show an IGMP snooping or MLD snooping multicast VLAN group.
Format
show [igmp_snooping | mld_snooping] multicast_vlan_group {<vlan_name 32>}
Parameters
igmp_snooping - Specify that IGMP snooping VLAN groups should be displayed.
mld_snooping - Specify that MLD snooping VLAN groups should be displayed.
multicast_vlan_group - Specify the the name of the multicast VLAN to be displayed.
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To show all MLD snooping multicast VLAN groups setup on the Switch:
DGS-3120-24TC:admin# show mld_snooping multicast_vlan_group
Command: show mld_snooping multicat_vlan_group
VLAN Name VLAN ID Multicast Group Profiles
------------------------------ ------------- -------------------------
mod 8 test