D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
683
Parameters
igmp_snooping - Specify that IGMP snooping multicast VLANs will be displayed.
mld_snooping - Specify that MLD snooping multicast VLANs will be displayed.
multicast_vlan - The name of the multicast VLAN to be shown.
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
characters long.
Restrictions
None.
Example
To display all IGMP snooping multicast VLANs:
DGS-3120-24TC:admin# show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
IGMP Multicast VLAN Global State : Disabled
IGMP Multicast VLAN Forward Unmatched : Disabled
VLAN Name : test
VID : 100
Member(Untagged) Ports : 1
Tagged Member Ports :
Source Ports : 3
Untagged Source Ports :
Status : Disabled
Replace Source IP : 0.0.0.0
Remap Priority : None
Total Entries: 1
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)