D-Link xStack DGS-3120 Series - Page 740

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
735
DGS-3120-24TC:admin#show ospfv3 aggregation
Command: show ospfv3 aggregation
OSPFv3 Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
--------------- ------------------ -------- ---------
2.2.2.2 2000::/16 Summary Enabled
Total Entries: 1
DGS-3120-24TC:admin#
71-14 show ospfv3 lsdb
Description
This command is used to display the OSPFv3 Link-State Database.
Format
show ospfv3 lsdb {area <area_id> | type [rtrlink | netlink | inter_area_prefix |
inter_area_router | asextlink | link_lsa | intra_area_prefix]}
Parameters
area - (Optional) Specify to only display the LSAs that belong to this area.
<area_id> - Enter the area ID.
type - (Optional) Specify to only display the LSAs of the specific type. The detail information for
these LSAs displays at the same time.
rtrlink - Specify to only display Router LSA.
netlink - Specify to only display Network LSA.
inter_area_prefix - Specify to only display Inter-area-prefix LSA.
inter_area_router - Specify to only display Inter-area-router LSA.
asextlink - Specify to only display AS external LSA.
link_lsa - Specify to only display Link LSA.
intra_area_prefix - Specify to only display Intra-area-prefix LSA.
Restrictions
None.
Example
To show display OSPFv3 Link-State Database: