D-Link xStack DGS-3120 Series - Page 742

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
737
DGS-3120-24TC:admin#show ospfv3 neighbor
Command: show ospfv3 neighbor
Router ID of Interface Neighbor Neighbor
Neighbor Name Priority State
--------------- ------------ -------- -------------
10.10.10.10 System 1 Full
20.20.20.20 ip1 10 Full
Total Entries: 2
DGS-3120-24TC:admin#
71-16 show ospfv3 virtual_neighbor
Description
This command is used to display OSPFv3 virtual neighbor information.
Format
show ospfv3 virtual_neighbor {<area_id> <neighbor_id>}
Parameters
<area_id> - (Optional) Specify the transit area where the virtual neighbor is built.
<neighbor_id> - (Optional) Specify the virtural neighbor router ID.
Restrictions
None.
Example
To display OSPFv3 virtual neighbor:
DGS-3120-24TC:admin#show ospfv3 virtual_neighbor
Command: show ospfv3 virtual_neighbor
Transit Router ID of Virtual Neighbor
Area ID Virtual Neighbor State
--------------- ---------------- ----------------
1.1.1.1 30.30.30.30 Full
Total Entries: 1
DGS-3120-24TC:admin#
71-17 create ospfv3 virtual_link
Description
This command is used to create an OSPFv3 virtual link